Tinting your car windows can be very useful and profitable, especially during the hot summer days. This is because the tint helps protect the interior of your vehicle. Next to that, it is also important to mention that your car’s value is boosted when it is tinted, so when you decide to sell it, you will be able to do it at a significantly higher price.
As for the job itself, you want to make sure that you have done it properly. Still, while it may be tempting to pay a professional to do the job for you, the fact is that it can cost you up to $500. And, you can do it right if you put enough effort and do it with care.
What do you need?
For tinting your car properly, you first need a window-tint film of your choice. You also need an appropriate application solution, a razor knife, a cleaning cloth with no lint, a scraper blade, a squeegee used for applying the tint, and a heat gun.
How to get the job done properly
First, you need to apply the solution to the inner side of the window. Make sure to be precise. Then use the scraper blade and slide it from one side to the other, from top to bottom. Then do the same with the squeegee in order to get rid of any leftovers.
Now you are ready for installing the tint. Use the application solution on the window’s outside and place the tint film across it. Make sure that the protective layer is, of course, on top. Thanks to the solution, you will be able to cut the film properly, but you should also use the squeegee to make sure that the tint stays in place.
You can use the window gasket as a template for cutting the film. Just cut right to the edges. Then, make sure that the film remains in place by fixing it to the window’s corner with some transparent tape. After that, you need to peel the protective liner off the film, while spraying it with the solution. Once it is off, you can take the film off the outside and place it on the inner side of the window. Make sure that you do it from the top so that you can fold the bottom edge in order not to touch the trim.
As you place the tint, it is important that you use the squeegee to make sure that all the air and water are pushed out. Then use a lint-free cloth to wrap around it, and slide it across the whole window. This is done in order to get rid of any remaining solution. Furthermore, if you see any bubbles of air trapped under the film, you should use a heat gun along with the squeegee to get rid of them.
What are the rules?
As for the rules regarding what kind of tint you can use for your car, it pretty much depends on where you live. If you are in Australia, you are allowed to tint the driver’s and the passenger’s front windows, as well as the back side of the B-pillar. However, if you ask a specialist, like experts for window tinting in Brisbane, you will learn that there is a difference in VLT (Visible Light Transference) depending on which window you are tinting. These could be 35%, 20%, or 15%.
Furthermore, you should know that you cannot do aftermarket tinting of your windscreen, but you can use a visor strip, which is permitted to be about 10% in most territories.
In Summation
Window tinting is a great way to protect your car’s interior from negative external influences, such as the sun’s UV rays. It is good to know that you can do this yourself with enough effort and care, if you want to save the money. Follow the tips presented in this article, but also make sure to adhere to the rules of the country that you live in.
